Ƙwallon niƙa na yumbu na Zirconium silicateAna samar da sinadarin niƙa daga silicate na zirconium (ZrSiO₄) ta hanyar yin sintering mai zafi, tare da sinadarin zirconium dioxide (ZrO₂) yawanci yana farawa daga 55% zuwa 65% da kuma sinadarin silicon dioxide (SiO₂) na 30% zuwa 37%. Yawansu na gaske shine kimanin 4.0–4.1 g/cm³, kuma yawansu yana farawa daga 2.5 zuwa 2.7 kg/L. Taurin Mohs yana tsakanin 7.2 da 8.0, kuma taurin Vickers ya wuce 900 HV. Yawan lalacewa shine ≤0.05 kg a kowace tan na slurry da aka sarrafa, kuma girman spherical shine ≥96%, wanda ke tabbatar da aiki mai kyau a cikin kayan aikin niƙa.
Ana amfani da beads na silicate na Zirconium sosai a cikin hanyoyin niƙa da warwatsewa don slurries masu ƙarancin danshi zuwa matsakaici, gami da fenti, shafi, tawada, pigments, sinadarai na noma, calcium carbonate, kaolin, da titanium dioxide. Sun dace da kayan aikin niƙa daban-daban kamar injinan niƙa mai motsawa, injinan niƙa ƙwallo, injinan niƙa yashi, da injinan niƙa mai saurin gudu. Idan aka kwatanta da beads na zirconia masu yawan yawa, beads na zirconium silicate suna ba da mafita mafi inganci tare da matsakaicin yawa da kuma juriya ga lalacewa don aikace-aikacen niƙa na gargajiya. Tsarin su mai siminti, mara ramuka yana rage karyewa kuma yana rage gurɓatar kayan da aka sarrafa.
Tare da daidaitaccen haɗin yawan aiki, tauri, da farashi, an kafa ƙwallon niƙa na silicate na silicate a matsayin matsakaici na yau da kullun don nau'ikan ayyukan niƙa na masana'antu daban-daban. Don aikace-aikacen da ke buƙatar yawan aiki ko ƙarancin gurɓatawa, ana ba da shawarar a zaɓi beads na zirconia na yttria-stabilized ko ceria-stabilized (yawan aiki 6.0 g/cm³, ƙimar lalacewa ≤0.01‰). Ya kamata a zaɓi hanyoyin niƙa masu dacewa bisa ga halayen kayan aiki, sigogin kayan aiki, da rarraba girman barbashi don cimma ingantaccen niƙa da tattalin arziƙin aiki.
Lokacin Saƙo: Afrilu-18-2026